WsfTadilJ11¶

Initial Words	Extension Words	Continuation Words
WsfTadilJ11_0I	WsfTadilJ11_0E0	WsfTadilJ11_0C1 WsfTadilJ11_0C2 WsfTadilJ11_0C3 WsfTadilJ11_0C4 WsfTadilJ11_0C9 WsfTadilJ11_0C13 WsfTadilJ11_0C14 WsfTadilJ11_0C15 WsfTadilJ11_0C16 WsfTadilJ11_0C17 WsfTadilJ11_0C18
WsfTadilJ11_1I	WsfTadilJ11_1E0	WsfTadilJ11_1C1 WsfTadilJ11_1C2 WsfTadilJ11_1C3 WsfTadilJ11_1C10
WsfTadilJ11_2I

WsfTadilJ11_0I¶

Message Methods¶

WsfTadilJ11_0E0 AddExtension0(): Adds extension word 0 to the message. This can only be called once for each extension word. Returns the extension word. Once the extension word belongs to the message, FindExtension0 may be used to retrieve the word.

WsfTadilJ11_0E0 FindExtension0(): Returns extension word 0 if it has been added to the message.

WsfTadilJ11_0C1 AddContinuation1(): Adds continuation word 1 to the message. Returns the continuation word. Once the continuation word belongs to the message, FindContinuation1() may be used to retrieve the word.

WsfTadilJ11_0C1 FindContinuation1(): Returns extension word 1 if it has been added to the message.

WsfTadilJ11_0C2 AddContinuation2(): Adds continuation word 2 to the message. Returns the continuation word. Once the continuation word belongs to the message, FindContinuation2() may be used to retrieve the word.

WsfTadilJ11_0C2 FindContinuation2(): Returns extension word 2 if it has been added to the message.

WsfTadilJ11_0C3 AddContinuation3(): Adds continuation word 3 to the message. Returns the continuation word. Once the continuation word belongs to the message, FindContinuation3() may be used to retrieve the word.

WsfTadilJ11_0C3 FindContinuation3(): Returns extension word 3 if it has been added to the message.

WsfTadilJ11_0C4 AddContinuation4(): Adds continuation word 4 to the message. Returns the continuation word. Once the continuation word belongs to the message, FindContinuation4() may be used to retrieve the word.

WsfTadilJ11_0C4 FindContinuation4(): Returns extension word 4 if it has been added to the message.

WsfTadilJ11_0C9 AddContinuation9(): Adds continuation word 9 to the message. Returns the continuation word. Once the continuation word belongs to the message, FindContinuation9() may be used to retrieve the word.

WsfTadilJ11_0C9 FindContinuation9(): Returns extension word 9 if it has been added to the message.

WsfTadilJ11_0C13 AddContinuation13(): Adds continuation word 13 to the message. Returns the continuation word. Once the continuation word belongs to the message, FindContinuation13() may be used to retrieve the word.

WsfTadilJ11_0C13 FindContinuation13(): Returns extension word 13 if it has been added to the message.

WsfTadilJ11_0C14 AddContinuation14(): Adds continuation word 14 to the message. Returns the continuation word. Once the continuation word belongs to the message, FindContinuation14() may be used to retrieve the word.

WsfTadilJ11_0C14 FindContinuation14(): Returns extension word 14 if it has been added to the message.

WsfTadilJ11_0C15 AddContinuation15(): Adds continuation word 15 to the message. Returns the continuation word. Once the continuation word belongs to the message, FindContinuation15() may be used to retrieve the word.

WsfTadilJ11_0C15 FindContinuation15(): Returns extension word 15 if it has been added to the message.

WsfTadilJ11_0C16 AddContinuation16(): Adds continuation word 16 to the message. Returns the continuation word. Once the continuation word belongs to the message, FindContinuation16() may be used to retrieve the word.

WsfTadilJ11_0C16 FindContinuation16(): Returns extension word 16 if it has been added to the message.

WsfTadilJ11_0C17 AddContinuation17(): Adds continuation word 17 to the message. Returns the continuation word. Once the continuation word belongs to the message, FindContinuation17() may be used to retrieve the word.

WsfTadilJ11_0C17 FindContinuation17(): Returns extension word 17 if it has been added to the message.

Field Accessors¶

int WeaponStatus()

void WeaponStatus(int): Gets or sets the value of the WeaponStatus field.

WsfTadilJ11_0E0¶

Field Accessors¶

int TrackNumberIndexOrig2()

void TrackNumberIndexOrig2(int): Gets or sets the value of the TrackNumberIndexOrig2 field.

WsfTadilJ11_0C1¶

Field Accessors¶

double Latitude()

void Latitude(double): Gets or sets the value of the Latitude field. Units are Deg.

double Longitude()

void Longitude(double): Gets or sets the value of the Longitude field. Units are Deg.

double HeightAboveEllipsoid()

void HeightAboveEllipsoid(double): Gets or sets the value of the HeightAboveEllipsoid field. Units are Meters.

WsfTadilJ11_0C2¶

Field Accessors¶

double Speed()

void Speed(double): Gets or sets the value of the Speed field. Units are Meters Per Second.

double Course()

void Course(double): Gets or sets the value of the Course field. Units are Radians.

int SelfAbortReason()

void SelfAbortReason(int): Gets or sets the value of the SelfAbortReason field.

double TimeToGoSeconds()

void TimeToGoSeconds(double): Gets or sets the value of the TimeToGoSeconds field.

WsfTadilJ11_0C3¶

Field Accessors¶

WsfTadilJ11_0C4¶

Field Accessors¶

int TrackNumberController()

void TrackNumberController(int): Gets or sets the value of the TrackNumberController field.

WsfTadilJ11_0C9¶

Field Accessors¶

int DetailedStatusInformation()

void DetailedStatusInformation(int): Gets or sets the value of the DetailedStatusInformation field.

WsfTadilJ11_0C13¶

Field Accessors¶

double WeaponLatitude()

void WeaponLatitude(double): Gets or sets the value of the WeaponLatitude field. Units are Deg.

double WeaponLongitude()

void WeaponLongitude(double): Gets or sets the value of the WeaponLongitude field. Units are Deg.

WsfTadilJ11_0C14¶

Field Accessors¶

double WeaponHeightAboveEllipsoid()

void WeaponHeightAboveEllipsoid(double): Gets or sets the value of the WeaponHeightAboveEllipsoid field. Units are Meters.

double WeaponVelocityNorth()

void WeaponVelocityNorth(double): Gets or sets the value of the WeaponVelocityNorth field. Units are Meters Per Second.

double WeaponVelocityEast()

void WeaponVelocityEast(double): Gets or sets the value of the WeaponVelocityEast field. Units are Meters Per Second.

double WeaponVelocityDown()

void WeaponVelocityDown(double): Gets or sets the value of the WeaponVelocityDown field. Units are Meters Per Second.

WsfTadilJ11_0C15¶

Field Accessors¶

double TargetLatitude()

void TargetLatitude(double): Gets or sets the value of the TargetLatitude field. Units are Deg.

double TargetLongitude()

void TargetLongitude(double): Gets or sets the value of the TargetLongitude field. Units are Deg.

WsfTadilJ11_0C16¶

Field Accessors¶

double TargetHeightAboveEllipsoid()

void TargetHeightAboveEllipsoid(double): Gets or sets the value of the TargetHeightAboveEllipsoid field. Units are Meters.

double TargetVelocityNorth()

void TargetVelocityNorth(double): Gets or sets the value of the TargetVelocityNorth field. Units are Meters Per Second.

double TargetVelocityEast()

void TargetVelocityEast(double): Gets or sets the value of the TargetVelocityEast field. Units are Meters Per Second.

double TargetVelocityDown()

void TargetVelocityDown(double): Gets or sets the value of the TargetVelocityDown field. Units are Meters Per Second.

WsfTadilJ11_0C17¶

Field Accessors¶

double AimpointLatitude()

void AimpointLatitude(double): Gets or sets the value of the AimpointLatitude field. Units are Deg.

WsfTadilJ11_0C18¶

Field Accessors¶

double AimpointLongitude()

void AimpointLongitude(double): Gets or sets the value of the AimpointLongitude field. Units are Deg.

double AimpointHeightAboveEllipsoid()

void AimpointHeightAboveEllipsoid(double): Gets or sets the value of the AimpointHeightAboveEllipsoid field. Units are Meters.

WsfTadilJ11_1I¶

Message Methods¶

WsfTadilJ11_1E0 AddExtension0(): Adds extension word 0 to the message. This can only be called once for each extension word. Returns the extension word. Once the extension word belongs to the message, FindExtension0 may be used to retrieve the word.

WsfTadilJ11_1E0 FindExtension0(): Returns extension word 0 if it has been added to the message.

WsfTadilJ11_1C1 AddContinuation1(): Adds continuation word 1 to the message. Returns the continuation word. Once the continuation word belongs to the message, FindContinuation1() may be used to retrieve the word.

WsfTadilJ11_1C1 FindContinuation1(): Returns extension word 1 if it has been added to the message.

WsfTadilJ11_1C2 AddContinuation2(): Adds continuation word 2 to the message. Returns the continuation word. Once the continuation word belongs to the message, FindContinuation2() may be used to retrieve the word.

WsfTadilJ11_1C2 FindContinuation2(): Returns extension word 2 if it has been added to the message.

WsfTadilJ11_1C3 AddContinuation3(): Adds continuation word 3 to the message. Returns the continuation word. Once the continuation word belongs to the message, FindContinuation3() may be used to retrieve the word.

WsfTadilJ11_1C3 FindContinuation3(): Returns extension word 3 if it has been added to the message.

WsfTadilJ11_1C10 AddContinuation10(): Adds continuation word 10 to the message. Returns the continuation word. Once the continuation word belongs to the message, FindContinuation10() may be used to retrieve the word.

WsfTadilJ11_1C10 FindContinuation10(): Returns extension word 10 if it has been added to the message.

Field Accessors¶

int TrackNumberAddressee()

void TrackNumberAddressee(int): Gets or sets the value of the TrackNumberAddressee field.

int WeaponDirective()

void WeaponDirective(int): Gets or sets the value of the WeaponDirective field.

bool ResponseRequest()

void ResponseRequest(bool): Gets or sets the value of the ResponseRequest field.

WsfTadilJ11_1E0¶

Field Accessors¶

WsfTadilJ11_1C1¶

Field Accessors¶

int ThirdPartySource()

void ThirdPartySource(int): Gets or sets the value of the ThirdPartySource field.

int TrackNumberHandOff()

void TrackNumberHandOff(int): Gets or sets the value of the TrackNumberHandOff field.

WsfTadilJ11_1C2¶

Field Accessors¶

double Latitude()

void Latitude(double): Gets or sets the value of the Latitude field. Units are Deg.

double Longitude()

void Longitude(double): Gets or sets the value of the Longitude field. Units are Deg.

double TargetVelocityDown()

void TargetVelocityDown(double): Gets or sets the value of the TargetVelocityDown field. Units are Meters Per Second.

WsfTadilJ11_1C3¶

Field Accessors¶

double HeightAboveEllipsoid()

void HeightAboveEllipsoid(double): Gets or sets the value of the HeightAboveEllipsoid field. Units are Meters.

double TargetVelocityNorth()

void TargetVelocityNorth(double): Gets or sets the value of the TargetVelocityNorth field. Units are Meters Per Second.

double TargetVelocityEast()

void TargetVelocityEast(double): Gets or sets the value of the TargetVelocityEast field. Units are Meters Per Second.

WsfTadilJ11_1C10¶

Field Accessors¶

double TargetVelocityNorth()

void TargetVelocityNorth(double): Gets or sets the value of the TargetVelocityNorth field. Units are Meters Per Second.

double TargetVelocityEast()

void TargetVelocityEast(double): Gets or sets the value of the TargetVelocityEast field. Units are Meters Per Second.

double TargetVelocityDown()

void TargetVelocityDown(double): Gets or sets the value of the TargetVelocityDown field. Units are Meters Per Second.

WsfTadilJ11_2I¶

Message Methods¶

Field Accessors¶

int WeaponCoordination()

void WeaponCoordination(int): Gets or sets the value of the WeaponCoordination field.